12V 5Ton Car Electric Tire Lifting Car Jacks Hydraulic Air Infatable Car Floor Jack With Tire Gauge Air Pump
Advantages: The machine is with the fashionable and beautiful design, and adopts the advanced electric machinery technology. It is low noise, quick speeding, stable lifting perfomance and so on.
Safety: Considering the safety, the machine designs self-locking power structure and overloading protection device specially. That is to say: when the power has been disconnected, the lifted jack will not fall, only re-connecting the power, the jack will go on working, or using the safety knob to fall the car, which will protect the operator’s personal safety effectively.
Practicability: In order to strengthen the practicability, the machine is added the functions of Tire Inflator Pump, Illumination and Warning.
So the machine combines two functions: Car Jack and Tire Inflator Pump
Application: The machine is widely used for Family Car, Go-anywhere Vehicle, Multi-Purpose Vehicle.
(1)Stop the car, tension the car brake.
(2)Check the switch whether it is to the close position, it should be to “O” state, if no, please do it so first, then connect the power plug into the car cigarette lighter.(Note: if the battery is not enough, please charge it first(start the car engine) or replace the battery)
(3)Put the jack in the side of car tyre, and ensure the centre of Pressure Rod to align the loading part of automobile chassis, then rotate the adjusting screw to make it close to the automobile chassis as far as possible.
(4)Adjust the function switch to “Lift”, the direction switch to “Up”, then the jack will start to work, till the distance between the car tyre and the floor is about 5cm, reset the power switch, while the power is disconnected, the machine would lock automatically and wouldn’t fall.
(5)After changing the tyre, adjust the direction switch to “Down”, the jack would start to fall in constant speed.
(6)Finish all, please collect the cables and tools in the box.
(1)Prepare for the equipment well, pull out the air hose and choose the suitable inflatable head to connect, then turn on the power.
(2)Adjust the function switch to “Inflation”, then it would start to inflate, please check the change of the pressure gauge.
(3)If finishing, please close the power first, then pull out the inflatable head to collect in the tool box. Later also pull out the plug from the cigarette lighter, then collect the cables into the tool box.
Note: when inflating each time, Not more than 10minutes.